|
Builders are unknowingly caught
in a quandary—if they install a ventless fireplace in
a new home without providing make-up air for that appliance
and an exhaust system for removing the combustion by-products,
they are in violation of construction codes. In addition
to introducing deadly or illness-causing gases like Carbon
Monoxide (CO), Carbon Dioxide (CO2) and Nitrogen Dioxide
(NO2), unvented gas fireplaces also produce a lot of
water or more specifically – water vapor. What dangers
are related to this increase in the relative humidity
level of the home? Actually, the proliferation of dust
mites, mold and mildew, which require at least 50 percent
- 70 percent relative humidity to thrive. So an unvented
fireplace could terminally poison you and make your house
self-compost.
It is much simpler, although slightly
more expensive initially, to install a vented or a direct
vent gas appliance. By the time the builder has…
• installed a dampered duct to provide
combustion air to the vent-free fireplace,
• installed a ducted flue or an exhaust fan that turns on when the fireplace
operates,
• removed the combustion gases to the outside of the house, and
• installed a fresh air intake to the mechanical system of the home,
…they could have installed a traditional
vented gas fireplace, or better yet, a direct vent gas
fireplace.
Furthermore, vent-free fireplaces
are not legal in all states, may be in violation of building
codes in states where they are legal and create mold
concerns, or worse. If you have additional questions
about your fireplace system as you attempt to stay warm
this winter, don’t hesitate to contact Southface or visit
www.southface.org.
|